AUTRONIKA SRL | |||
You're at: Home :: Common Rail Test Equipment :: Common Rail Piezo-Electric Injector Tester | |||
COMMON RAIL INJECTOR TESTER (PIEZO-ELECTRIC TYPE)
TECHNICAL CHARACTERISTICS Mains Supply: 220/230 Volt Frequency: 50 Hz Temperature: -25 / +55 œC Logic: Microprocessor Display: 1 Digit
Common Rail Piezo-electric Injector Tester, created by a revolutionary method and controlled by a logic of microprocessor is the most economical system for static Common Rail injectors control because of its easy operation at precision of the commands given to the injector, allowing simulation of the start, minimum and maximum load tests. Common Rail Piezo-electric Injector Tester usage in combination with a simple hand-operated injector tester allows to control the nozzle of the injectors (SIEMENS and BOSCH) with a visualization of pulverization as well as control of the injector internal mechanics correct running by visualization of gasoil recuperation from the injector and the injector electronic part correct operation. Control interface is presented by two simple pulsing switches and two easy to read displays showing the programmed levels necessary for the test performance. Common Rail Piezo-electric Injector Tester kit contains the mains supply cable and the basic cable for SIEMENS/BOSCH Injectors.
| |||
|
WOL.BZ - Free hosting |